L O A D I N G
blog banner

57DP-12-2C2 RELAY PDF

RELAY 57DP 1C6 24V. RELAY 57DP 1C6 6V. RELAY 57DP 1C/O 24V OEN. RELAY 57DP2C2 12V. RELAY 57DP 2C2 16V. RELAY 57DP 2C6 24V. RELAY. Supply Of Oen Relay 57DpV-2C Make- Oen/Pla/Omron. Details As Per Annexure-A. | Due date: 28 Jun, | Tender work Value. 57DPB2 57DPB6 57DPA2 57DPA6 57DPC2 57DPC6 57DPA2 57DPC2 57DPC6 57DPC2 57DPC6 57DPB2 57DPB6 Description, MINIATURE POWER RELAYS.

Author: Moogurg Nijinn
Country: United Arab Emirates
Language: English (Spanish)
Genre: Automotive
Published (Last): 7 September 2005
Pages: 10
PDF File Size: 17.7 Mb
ePub File Size: 19.97 Mb
ISBN: 881-1-41450-827-2
Downloads: 8276
Price: Free* [*Free Regsitration Required]
Uploader: Faegar

SER Tenders from West Bengal Tender Notice – 16349314

This will be taken into account when the external encoder is to position 0. The values entered in the last screen are entered into Drive Parameter S Program 1 Block Program 2 Block Program 3 Block Any of these three programs can be executed, based on the position of a selector switch, by programming the following routine starting at NC Block N with conditional jumps.

When the Txx function is programmed in a NC Block, the Tool Correction register programmed must coincide with the axis programmed see table on previous pages. C-1 Process Data Channel But the final relag also takes into account whatever minimal deflection may have existed e. Reverse Vector NC Code JR When an executing user program is interrupted with a Home Reverse signal, and the axis is to be returned to the Home position, it is often necessary to execute different program sequences depending on the status of the user program at the time the Home Reverse signal was received.

The point at which slip limit will be activated. If the external encoder is to be used as the primary positioning device, rela CTA will set A bit 10 to a 1 for a linear scale or an external rotary encoder. Switch 57dp-12-2v2 Marker Pulse When using the switch and marker pulse, the Home position will be the first marker pulse encountered after the Home switch is made Marker Pulse When using marker pulse, the axis will home to the first marker pulse it encounters after it receives the Home input or Reverse in Manual mode.

  DROSOPHILA MELANOGASTER MUTACIONES PDF

This parameter is not used when a rotary application has been selected for the axis Axis Parameter Aa02 has been configured with Units per Table Revolution. After moving into the next parameter Aa02the CTA will enable the options selected. When set to a 1, the N-output analog output on the drive represents the temperature of the spindle motor.

The General Parameter set is 57dp-122-c2 as SAx. Axis Parameters”, or “3. It does not back out to the home position — instead it moves forward on the normal return profile until it reaches the home position. Screen 3 and sub-screens are only displayed if a spindle axis has been configured in Process parameter P02 Axis Configuration.

If the programmer does not enter a Feedrate in this NC Block, it will be executed using the last feedrate value used for a positional move.

The G01 positional move command will cause the rotary axis to move the incremental distance specified in this program block. When the theoretical end position of the G75 block is programmed, the theoretical end position should be at least four times the following error past the mechanical positive stop. Can be X, Y, Z, or S.

57DP-12-2C2

The TRANS D can determine which type of digital drive is connected as a spindle drive and display the corresponding set of spindle parameters.

This means that the next positioning command made after a clamping operation should be an absolute relsy. Feedrate of 40 units per measurement 7.

Feedrates will be in inches per minute. The next screen that appears is the Linear Scale Resolution screen and requires that you enter the distance per pulse for the linear scale you are using.

  14066B DATASHEET PDF

If it is zero, the TRANS D will stop program block execution and issue an error message to tell the user this situation exists. The reverse vector number is retained even if a power failure occurs. This should be avoided. No requirements for proceeding to next block To view any other NC Block, press the ESC key to return to the Programming Mode screen, select Review once again and enter the next block number. Refer to Tool Corrections on page for more information. If not, program execution halts and a soft fault occurs.

Parameters that are listed with a number can be selected by the numerical keypad on the CTA or by using the up and down arrows. These designations follow the axis designations used for CNC type machines. Enter a 0 for positive and a 1 for negative.

Tender for Supply Of Oen Relay 57DpV-2C | Tenders in Kharagpur – West Bengal

When set to 1, monitoring of the external encoder not is not active Bit The purpose of these divisions is to enable the user to easily configure their unit with the least amount of keystrokes.

If the threshold is relayy, then bit 7 of S class 3 diagnosticsis set to 1, and, once the value drops below the threshold, cleared. Motor Encoder 2. If the integral-action component of the speed controller is always active, set this bit to 0. Enter the number of the desired parameter using the numeric keypad or the up and down arrows to scroll through the available parameters, then 57fp-12-2c2 ENTER to view that specific parameter.

57DP-12-2C2 RELAY PDF

RELAY 57DP 1C6 24V. RELAY 57DP 1C6 6V. RELAY 57DP 1C/O 24V OEN. RELAY 57DP2C2 12V. RELAY 57DP 2C2 16V. RELAY 57DP 2C6 24V. RELAY. Supply Of Oen Relay 57DpV-2C Make- Oen/Pla/Omron. Details As Per Annexure-A. | Due date: 28 Jun, | Tender work Value. 57DPB2 57DPB6 57DPA2 57DPA6 57DPC2 57DPC6 57DPA2 57DPC2 57DPC6 57DPC2 57DPC6 57DPB2 57DPB6 Description, MINIATURE POWER RELAYS.

Author: Kigazahn Balrajas
Country: Tanzania
Language: English (Spanish)
Genre: Art
Published (Last): 2 August 2018
Pages: 435
PDF File Size: 15.7 Mb
ePub File Size: 19.26 Mb
ISBN: 795-3-30358-520-5
Downloads: 43240
Price: Free* [*Free Regsitration Required]
Uploader: Turn

If repay path is chosen, the drive will position the spindle the same as it would position any rotary axis. Standard boost of slippage is operative.

57DPC2 Datasheet(PDF) – OEN India Limited

A jump instruction at the end of the new program section can transfer control back to the original program. Linear Scale 3. Homing Reference This parameter indicates the method used to determine the initial home position. The TRANS D allows a jump to the reverse program to be performed even if the acknowledgments do not match their associated auxiliary outputs. Using Adaptive Depth programming requires additional hardware for the servo drive. Table is clamped through Line Control logic.

After moving into the next parameter Aa02the CTA will enable the options selected. This NC part program was written for a three axes servo system with each axis motor containing an Absolute Encoder that can be referenced to a positive stop.

Two types of positioning can be selected in the system, absolute G90 and incremental G For example, if the tool is in the part, your Home Reverse program may be different than if the tool were at the face of the workpiece. The bipolar torque limit value determines the maximum allowable torque in either direction.

  DATASHEET PIC16F873 PDF

User`s Manual – Version 02

XProfibus and DeviceNet products under development. The maximum following error which is allowed by the position loop can be defined in the monitoring window. This will set the new units into the system. Active 1 – internal monitor of ext. Once the spindle position command is activated, the falling edge of the cam switch signal is searched for felay position spindle speed S-x The value is non-signed, as the direction is determined by the 57dp-1-22c2 of the state of parameter Aa This prevents hitting the stop at too high a speed.

Facebook Official Page

Thus, the zero offset can be used by the programmer in order to program the measurements in a machining program with respect to one of the surfaces of the work piece. These two values are summed and placed into S Position Feedback 2, Reference Distance as the value to be displayed when at the Home position. If you want Spindle positioning without a spindle encoder, but with a Home limit switch instead, set this bit to 1. Compare the actual slide position with the marks to verify that the correct distance was traversed.

In this configuration, when power is applied to the system, the axis will have to be referenced before any program can be executed, If this parameter is set to a 0 defaultthe motor-drive system will operate as originally configured. Auxiliary functions can be turned on, off or left unchanged by entering a 0, 1 or a 2 in the proper command positions. Enter the position you want the spindle to orient.

  DROSOPHILA MELANOGASTER MUTACIONES PDF

Electric Relays buy in Mumbai

When the TRANS D is operating, the correction value in the specified tool correction register will be added to the programmed position value. The password screen is designed to allow only authorized and trained personnel to enable or disable the CTA Sets the maximum speed to be used when the Drive Controlled Oscillation command is set to accommodate a gear change.

The advantage of the Distance coded scale is the user does not have to re-establish a Home position, it only needs to establish where it is in relation to the machine reference point if axis reference is ever lost. It is disabled for standard linear scale operation. JS does not set the Reverse Vector to N Positions must be entered in degrees, with a resolution of 0.

Once an acknowledgment is issued, the signal line must be held in 57ddp-12-2c2 state until the function output changes. Exit from Parameter Mode. Parameter ranges are displayed as you edit the values.